The Mixed-Use (MU) zones provide for mixed-use developments that permit a broad range of commercial, institutional, and multiple dwelling unit residential development at varying densities.
The purpose of the MU-1 zone is to:
- Act as a buffer between adjoining non-residential and residential areas, and to ensure that new development is compatible in use, scale, and design with the transitional function of this zone;
- Preserve and protect areas adjacent to non-residential uses or zones that contain a mix of row houses, apartments, offices, and institutions at a medium to high density, including buildings of historic and architectural merit; and
- Permit new residential development at a higher density than new office or institutional developments.
The MU-1 zone is intended to permit moderate-density areas predominantly developed with residential buildings but also permitting non-residential buildings.
|Floor Area Ratio (max.)||Height (ft.)||Penthouse Height (ft.)/Stories1||Lot Occupancy
|Rear Setback (ft.)||Side Setback (ft.)||Green Area Ratio||Zoning Regulation Reference|
|20||80||12 required above a horizontal plane (see Subtitle G § 305)2||No side setback is required; however, if a side setback is provided it shall be at least 2 in. wide for each 1 ft. of height of building but no less than 5 ft.3||0.3||Subtitle G, Chapter 3|
|2.5 (non-residential)||1 plus mezzanine; Second story permitted for penthouse mechanical space||8 ft. for a single-family detached or semi-detached dwelling|
1Except as prohibited on the roof of a detached dwelling, semi-detached dwelling, rowhouse, or flat in Subtitle C § 1500.4.
2 A horizontal plane may be established at 25 ft. above the mean finished grade at the middle of the rear of the structure for the purpose of measuring rear setbacks. A rear setback is not required to be provided below a horizontal plane as described in Subtitle G § 305.2. Where a lot abuts an alley, the rear setback may be measured from the center line of the alley to the rear wall of the building or other structure. Where a lot does not abut an alley, the rear setback shall be measured from the rear lot line to the rear wall of the building or other structure.
3 Any portion of a building setback from the side lot line shall be considered a side yard and not a courtyard.