The PDR-2 zone is intended to permit medium-density commercial and PDR activities employing a large workforce and requiring some heavy machinery under controls that minimize any adverse impacts on adjacent, more restrictive zones.
|Floor Area Ratio (max.)1, 2||Height (ft.)3, 4||Transition Setback||Rear Setback (ft.)||Side Setback (ft.)||Green Area Ratio (min.)||Zoning Regulation Reference|
|PDR-2||4.5||60||See Subtitle J § 207||See Subtitle J § 205||None unless abutting a residential zone or lot developed for residential use (see Subtitle J § 206)||0.30 (see Subtitle J § 208)||Subtitle J, Chapter 2|
|3.0 (max. for restricted uses)|
1 The following use categories may achieve the maximum FAR: basic utilities; large scale government; production, distribution, and repair; and waste-related services. All other permitted, conditional, or special exception use categories are subject to the maximum restricted uses FAR.
2 Development on a lot that directly abuts a residentially zoned property with a lower height limit, shall not project above a plane drawn at a 1:1 angle subject to the following: (a) the plane shall be measured 10 ft. above the by-right height of the abutting residential property line; and (b) the measuring point shall be established at the middle of the abutting residential property line.
3 A building or other structure may be erected to a height not exceeding 90 ft., provided that the building or structure shall be removed from all lot lines of its lot for a distance equal to the height of the building or structure above the natural grade.
4 An institutional building or structure may be erected to a height not exceeding 90 ft., provided that the building or structure shall be removed from all lot lines of its lot a distance of not less than 1 ft. for each foot of height in excess of that authorized in the zone in which it is located.